mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Instrument Panel Circuit Board > < A/T Position Indicator - Light Failure
Page 1
background image

Instrument Panel Bulb: Customer Interest
A/T Position Indicator - Light Failure

Bulletin No.: 001/95
Issued: 1/30/95
Revised:

Category

T

Applicable Model/s
1995 Millenia

Subject
A/T POSITION INDICATOR LIGHT FAILURE

APPLICABLE MODELS

1995 Millenia vehicles with a VIN of JM1TA22**S1118214 and lower.

DESCRIPTION

The A/T position indicator light in the instrument cluster may fail to illuminate when a gear change is selected. The failure is caused by heat from the
bulb deforming the meter case resulting in poor continuity.

To prevent this problem, the wattage and design of the bulb have changed. The wattage has changed from 2W to 1.4W and the meter case height has
been increased.

REPAIR PROCEDURE

If a customer complains about this problem, replace the case set with the modified parts.

PARTS INFORMATION

Part Number

Description

Applicable Models

TOY1 55 46X

Case Set

Without Traction Control

TOY2 55 46X

Case Set

With Traction Control

NOTE

The original bulb is no longer available.

WARRANTY INFORMATION

(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To the SRT Microfiche For Warranty Term
Information)

Warranty Type:

A

Symptom Code:

61

Damage Code:

97

Part Number Main Cause:

Refer to Parts Information

Quantity:

1

Operation Number:

TO6O4XRX

Labor Hours:

1.0 Hrs.

Instrument Panel Circuit Board > < A/T Position Indicator - Light Failure