mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Instrument Panel - Clattering Noise|Page 5516 > < Instrument Panel - Clattering Noise|Page 5510
Page 1
background image

Instrument Panel Circuit Board: All Technical Service Bulletins
Instrument Panel - Clattering Noise

Bulletin No.: 007/96
Issued: 02/07/96
Revised:

Category
S

Applicable Model/s
1995 Millenia
1995 Protege

Subject 
INSTRUMENT PANEL CLATTER NOISE

APPLICABLE MODELS/VINS

All 1995 Millenia vehicles with a VIN of JM1TA22**S1139666 through JM1TA22**S1145824 
All 1995 Protege vehicles with a VIN of JM1BA14***0151623 through JM1BA14***0173933.

DESCRIPTION

A clatter noise may be heard around the instrument panel while driving the vehicle. This is caused by a screw that holds the ABS circuit board in place.
while driving, it is possible for the screw to work loose and roll around inside the ABS control unit case.

A new screw and lock washer replace the current design (washer-based screw). Customers complaining of this noise should have the screw retrieved and
installed according to the instructions in this bulletin.

NOTE

The ABS operation is not affected by this concern.

REPAIR PROCEDURE

Instrument Panel - Clattering Noise|Page 5516 > < Instrument Panel - Clattering Noise|Page 5510