Millenia V6-2255cc 2.3L DOHC (1995)
Timing Belt: Customer Interest
Timing Belt Cover - Oil Leaks
Bulletin No.: 001/96
Issued: 09/09/96
Revised:
Category
D
Applicable Model/s
1995 - 96 Millenia
Subject:
OIL LEAKING FROM UNDER THE TIMING BELT COVER
APPLICABLE MODELS/VINS
All 1995 Millenia S
1996 Millenia S with a VIN of JM1TA222*1209316 and lower.
DESCRIPTION
Oil may leak past the threads of the No. 3 engine mount and out of the timing belt cover Customers complaining of this should have the vehicle inspected
and repaired according to this bulletin.
REPAIR PROCEDURE
1.
Remove the No. 3 engine mount according to the workshop manual.
2.
Remove the No. 3 engine mount bracket mounting stud from the cylinder block.
CAUTION:
Use caution to avoid mounting stud thread damage.
3.
Clean the threads thoroughly and apply Loctite PST Pipe Sealant w/ Teflon (# 565).
4.
Install stud into cylinder block
NOTE:
Replace timing belt if oil contaminated.
5.
Install engine mount
6.
Verify repair.