mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2534 > < Component Tests and General Diagnostics
Page 2
background image

Inspection

1. Verify that the ignition switch is OFF.
2. Disconnect the idle air control valve connection.
3. Measure the resistance of the idle air control valve by using an ohmmeter.

Specification: 10.7-12.3 ohms 20°C (68°F) 

4. If not as specified, replace the BAC valve. 

Component Tests and General Diagnostics|Page 2534 > < Component Tests and General Diagnostics