mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < Component Tests and General Diagnostics|Page 1575
Page 1
background image

Idle Speed Control Unit: Service and Repair

Removal / Installation

1. Disconnect the negative battery cable.
2. Drain the coolant from the radiator. 
3. Remove the air charge cooler air duct.
4. Remove the resonance chamber.
5. Remove in the order shown in the figure.
6. Install in the reverse order of removal.
7. Refill the radiator with the specified engine coolant. 

1. Air hose
2. Water hose
3. BAC valve

Main Relay (Computer/Fuel System) > < Component Tests and General Diagnostics|Page 1575