mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Seat Belt - Caution Label Pulls Out of Sleeve|Page 4364 > < Seat Belt - Will Not Retract/Hard to Pull Out
Page 1
background image

Seat Belt: Customer Interest
Front Seat Belt - Caution Label Pulls Out of Sleeve

Bulletin No.: 050/96
Issued: 12/05/96
Revised:

Category

S

Applicable Model/s
1995 - 96 Millenia

Subject:
FRONT SEAT BELT CAUTION LABEL PULLS OUT OF SLEEVE

APPLICABLE MODELS
1995 - 96 Millenia with a VIN of JM1TA222**T1203572 and lower.

DESCRIPTION
The front seat belt Label may come out of the label sleeve creating a poor appearance. The label is now held in place by a pin to prevent this occurrence.
Customers complaining of this condition should have the vehicle inspected and it necessary repaired according to this bulletin.

NOTE

This concern does not affect the function or performance of the seat belt.

REPAIR PROCEDURE

1.

Verify the concern.

2.

Move the seat forward.

3.

Remove the seat belt sleeve from the anchor bolt and move seat belt sleeve upward.

Front Seat Belt - Caution Label Pulls Out of Sleeve|Page 4364 > < Seat Belt - Will Not Retract/Hard to Pull Out