Millenia V6-2255cc 2.3L DOHC (1995)
Knock Sensor: Service and Repair
WARNING:
-
Fuel vapor Is hazardous. it can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
-
Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and
eyes. To prevent this, always complete the "Fuel Line Safety Procedure".
REPLACEMENT:
1. Disconnect the negative battery cable.
2. Drain the coolant from the radiator.
3. Remove the intake air system.
4. Remove in the order shown in the figure.
5. Install in the reverse order of removal, referring to Installation note.
6. Refill the radiator with the specified engine coolant.
1. Water inlet pipe
2. Lysholm compressor bracket
3. Knock sensor
INSTALLATION NOTES:
Lysholm Compressor Bracket
1. Hand tighten bolts A first.
2. Tighten all the bolts in the order shown in the figure.
Tightening Torque: 16-22 Nm (12-16 ft.lb.)
