mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Starting and Charging|Battery > < Ignition Switch Lock Cylinder|Service and Repair
Page 2
background image

1. Column bushing damage
2. Column bearing damage

3. Steering shaft length should be 557.5 mm (21.95 inch)

ASSEMBLY 

1. Follow removal steps in reverse order in the illustration, noting the following.

2. Install the steering lock assembly on the jacket.
3. Verify that the lock operates correctly.
4. Install new steering lock mounting bolts.
5. Tighten the bolts until the heads break off.

Starting and Charging|Battery > < Ignition Switch Lock Cylinder|Service and Repair