Millenia L V6-2.5L DOHC (1997)
Air Bag Control Module: Service and Repair
WARNING: Handling the SAS unit improperly can accidently deploy the air bag, which may seriously injure you. Read SERVICE
WARNINGS, before handling the SAS unit.
1. Carry out the "Before Servicing" procedure.
2. Remove the heater unit.
3. Remove in the order shown.
4. Install in the reverse order of removal.
5. Follow the troubleshooting flowchart to verify that the air bag system is operating normally.
1. Nut
2. SAS unit
3. Wiring harness
4. Heater duct
5. Bolt
6. Nut
7. Bracket
Installation Note
SAS unit and bracket
1. If the bracket mounting area is damaged, repair the area to its original shape.
2. Position the SAS unit and bracket with the arrow on the SAS unit facing toward the front of vehicle. Install them and tighten the bolts and nuts to
the specified torque.