mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Fuel Door/Trunk Opener Switch - Loose|Page 250 > < Hood Sensor/Switch (For Alarm)|Testing and Inspection
Page 1
background image

Technical Service Bulletin # T0900998

Date: 980805

Fuel Door/Trunk Opener Switch - Loose

Bulletin No. 009/98

Issued 08/05/98

Revised

Category
T (09)

Applicable Model/s
1995-97 Millenia

Subject
FUEL/TRUNK OPENER SWITCH LOOSE

APPLICABLE MODEL(S)/VINS
1995 - 97 Millenia with VINs lower than JM1 TA22**W1405202.

DESCRIPTION

The fuel/trunk opener switch may become loose or detached from the door trim panel. This may be due to the speed nut interfering (contacting) with the 
switch causing the lock tab of the switch and/or speed nut being broken, loose or out of position. To correct this concern, the modified speed nut with a
smaller diameter is available which prevents interference with the switch. Oil on the speed nut has also been removed to reduce cracking or breakage.
Customers complaining of this concern should have their vehicle repaired according to the following procedure.

PART(S) INFORMATION

WARRANTY INFORMATION

Note

^

This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty
term information.

Warranty Type

A

Symptom Code

89

Damage Code

9A

Part Number Main Cause / Quantity TA01-66-630A-02 or TA01-66-630A-80 / 0 or 1
Related Part Number / Quantity

9YB32-0301 / 2

Operation Number / Labor Hours

XX984XRX  /0.3

Repair Procedure

1.

Verify customer complaint.

2.

Remove door trim panel using the following procedure.

A.

Record preset stations on the vehicle's audio system.

B.

Remove negative battery terminal.

C.

Remove door mirror inner sail garnish. Pull out inner door handle cover.

Fuel Door/Trunk Opener Switch - Loose|Page 250 > < Hood Sensor/Switch (For Alarm)|Testing and Inspection