Millenia L V6-2.5L DOHC (1997)
4. Install the mount so that the flexible hose bracket of the shock absorber faces the front of the vehicle as shown.
5. Temporarily tighten the nut.
6. Remove the SST.
7. Verify that the lower coil of the spring is seated on the step of the lower seat.
8. Secure the mount in a vise.
9. Tighten the nut.
^
M12 nut: 35 - 49 Nm (26 - 36 ft. lbs.)
^
M10 nut: 32 - 46 Nm (24 - 33 ft. lbs.)
Using Special Service Tool 49 T034 1A0