mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Seals and Gaskets, A/T|Service and Repair|Page 3048 > < Pressure Regulating Solenoid, A/T|Testing and Inspection

Millenia L V6-2.5L DOHC (1997)

Page 1
background image

Seals and Gaskets: Service and Repair

ON-VEHICLE REPLACEMENT 

1. Remove the driveshaft and joint shaft.
2. Remove the oil seal.
3. Using the Special Service Tool (SST) and a hammer, tap a new oil seal in evenly until the SST contacts the transaxle case.
4. Coat the lip of the oil seal with transaxle oil.
5. Install the driveshaft and joint shaft.

Seals and Gaskets, A/T|Service and Repair|Page 3048 > < Pressure Regulating Solenoid, A/T|Testing and Inspection