Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1395001.png)
Front Door Weatherstrip: Service and Repair
1. Open the door glass fully.
2. Disconnect the negative battery cable.
3. Remove the power outside mirror.
4. Remove the front door glass.
5. Remove as indicated in the table.
6. Install in the reverse order of removal.
Front beltline Molding Removal Note
1. Remove the installation screws.
2. Insert a screwdriver which has been wrapped in tape under the clip as shown. Lift the screwdriver and pull up on the molding to remove it.