Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1584001.png)
Oil Pressure Sender: Testing and Inspection
OIL PRESSURE SWITCH INSPECTION
1. Verity that the oil pressure warning light illuminates when the ignition switch is turned to ON.
2. Verify that the oil pressure warning light goes oft when the engine is started.
-
If the oil pressure warning light does not illuminate or remains illuminated, inspect the oil pressure warning light bulb and related wiring
harness.
-
If the oil pressure warning light bulb and related wiring harness are normal, inspect the oil pressure.
-
If the oil pressure is normal, replace the oil pressure switch.