Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-663001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor Heater (Front) Inspection
1. Connect the SSTs (NGS tester) to DLC2.
2. Select the PID/DATA MONITOR AND RECORD function of NGS tester.
3. Select "FHO2SH R" and "FHO2SH L" on the NGS tester display. NGS shows the operation.
-
If not as specified, inspect following.
-
MAF sensor
-
CMP sensor
-
HO2S
Specification
Specification