Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-142001.png)
Combination Switch: Service and Repair
Removal/Installation
WARNING: Handling the air bag module improperly can accidently deploy the air bag, which may seriously injure you. Read AIR BAG
SYSTEM SERVICE WARNINGS before handling the air bag module.
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the steering wheel.
4. Remove the column cover.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.