Millenia S V6-2.3L DOHC (Miller cycle) (2000)
2. Secure SST (1-A) and screw SST (1-B) onto it.
3. Tighten SST (1-B) to secure SST (1-A) onto the pulley shaft.
Tightening torque (reaction torque of SST 1-A)
53.9 N.m {5.50 kgf.m, 39.8 ft.lbf}
4. Secure SST (2) in a vise by its straight edges.
5. With SST (1-A and B) installed, fit the pulley locknut of the generator into the SST (2).
6. Turn SST (1-A) in the generator rotation direction to loosen the pulley locknut.
7. Remove the generator from SST (2).
8. Secure SST (1-A) and loosen SST (1-B). Remove SST (1-A and B).
9. Remove the pulley locknut and pulley.
Pulley Installation Note
Install in the reverse order of removal.