Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Shift Interlock Switch: Testing and Inspection
P POSITION SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the rear console box and center panel.
3. Remove the indicator screws and lift up the indicator panel.
4. Disconnect the connector.
5. Inspect for continuity between the terminals h and k.
-
If not as specified, replace the P position switch.
6. Connect the connector.
7. Install and adjust the indicator panel.
8. Install the center panel and rear console box.
9. Connect the negative battery cable.
10. Inspect for correct operation of the shift-lock system.