Millenia S V6-2.3L DOHC (Miller cycle) (2000)
![background image](/mazda/millenia_s/v6-2.3l_dohc_(miller_cycle)/Page-992001.png)
Transmission Speed Sensor: Testing and Inspection
OUTPUT SPEED SENSOR INSPECTION [LJ4A-EL]
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Disconnect the output speed sensor connector.
4. Measure the resistance between the terminals of the output speed sensor.
-
If not as specified, replace the output speed sensor.
5. Connect the output speed sensor connector.
6. Install the battery.
7. Connect the negative battery cable.