Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1699002.png)
13. Pass the SST (piano wire) through the hole.
14. Wind each end of the wire around a bar.
15. Working with another person, saw through the sealant around the edge of the glass. Use a long sawing action to spread the work over the whole
length of wire to prevent it from breaking. Make sure the wire does not rub on the body or the dashboard.
16. Remove the glass.
17. Remove the spacers and dam.
INSTALLATION
1. Cut away the old sealant using a razor so that 1 to 2 mm {0.04 to 0.08 in} of sealant remains around the circumference of the frame.