MPV L4-2606cc 2.6L SOHC (1989)
A/C Coupler O-ring: All Technical Service Bulletins
A/C - O Ring Installation Procedure
Bulletin No.
016/92
Issued:
9/4/92 Revised
Category
U
Applicable Model/s
(see below)
Subject
A/C O-RING INSTALLATION
DESCRIPTION
A procedure for A/C O-ring installation has been developed. Be sure to follow this procedure to eliminate refrigerant leaks and unnecessary repairs.
APPLICABLE MODEL/S
1988-'92 626/MX-6
1988-'92 B-Series
1988-'93 323/Protege
1989-'91 RX-7 (Non-Turbo)
1989--'93 MPV (single A/C only)
1990-'93 MX-5 Miata
1992-'93 MX-3
INSTALLATION PROCEDURE
1.
Before installing the O-ring, inspect the pipe/ hose for any damage.
2.
Verify the O-ring is clean and free from defects. Place O-ring on pipe. Be sure it is seated properly (figure 1).
3.
Lightly apply oil to the O-ring with refrigerant oil. Do not oil the threads or connecting hose seat (figure 2).