MPV L4-2606cc 2.6L SOHC (1989)
Blower Motor Relay: Testing and Inspection
Rear Heater Relay
Rear Heater Relay Inspection
1. Remove the rear heater relay.
2. Check continuity between terminals 3 and 4.
3. If not as specified, replace the relay.
4. If correct, go to next step.
5. Apply battery voltage to terminal 1 and ground terminal 2.
Check for continuity between terminals 3 and 4.
6. If correct, relay is OK.
7. If not as specified, replace the relay.