MPV DX V6-2.5L DOHC (2000)
7.
Verify clearance "A" (5 - 9 mm).
-
If the clearance "A" is still out of the specification, proceed to STEP 8.
-
If clearance "A" is within the specification, proceed to STEP 9.
8.
Loosen the three lower roller bracket bolts and adjust the position, then tighten them to the specified torque.
Tighten Torque: 22-30-N-m (2.2 - 3.0 kgf.m, 16 - 22 ft.lbf)
9.
Reinstall the sliding door trim and upper frame according to Workshop Manual (section 09-17 SLIDING DOOR TRIM
REMOVAL/INSTALLATION and SLIDING DOOR UPPER FRAME REMOVAL/INSTALLATION).
10.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION