MPV DX V6-2.5L DOHC (2000)
Blower Motor: Testing and Inspection
Rear Blower Motor
1. Disconnect the negative battery cable.
2. Remove the rear side trim (RH).
3. Discharge the refrigerant from the system.
4. Disconnect the rear cooler pipe No.2.
5. Remove the bolts and pull down rear A/C unit.
6. Disconnect the rear blower motor connector.
7. Connect battery positive voltage to terminal B and ground to terminal A of the rear blower motor.
8. Verify that the rear blower motor operates.
-
If not as specified, replace the rear blower motor.
