MPV DX V6-2.5L DOHC (2000)
Fuel Injector: Testing and Inspection
Fuel Leakage Test
WARNING: Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Always carry out the
following procedure with the engine stopped.
NOTE: Perform the following test only when directed.
1. Complete the "BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Remove the fuel injectors together with the fuel distributor connected to fuel hose.
4. Fasten the fuel injectors firmly to the fuel distributor with wire.
5. Connect the negative battery cable.
CAUTION: Connecting the wrong DLC terminal may possibly cause a malfunction. Carefully connect the specified terminal only.
6. Short the DLC terminal F/P to body GND using a jumper wire.
7. Turn the ignition ON to operate the fuel pump.
8. Tilt the fuel injectors approx. 60 degrees and verify that fuel leakage from the fuel injector nozzles is within the specification.
-
If not as specified, replace the fuel injector.
Fuel leakage
Less than 1 drop/2 minutes
9. Turn the ignition switch to LOCK position and remove the jumper wire.
10. Complete the "AFTER REPAIR PROCEDURE".