MPV DX V6-2.5L DOHC (2000)
![background image](/mazda/mpv_dx/v6-2.5l_dohc/Page-752001.png)
Ignition Coil Pack: Testing and Inspection
Spark Test
Steps 1 - 7
1. Disconnect the fuel pump relay.
2. Verify that each high-tension lead and connector is connected properly.
3. Inspect the ignition system in the following procedure.
WARNING: High voltage in the ignition system can cause strong electrical shock which can result in serious injury. Avoid direct contact
to the vehicle body during the following spark test.