MPV DX V6-2.5L DOHC (2000)
![background image](/mazda/mpv_dx/v6-2.5l_dohc/Page-142002.png)
-
If there is continuity, the circuit is shorted. Repair or replace the harness.
-
Front HO2S (RH) terminal C (harness-side) and body ground
-
Front HO2S (RH) terminal D (harness-side) and body ground
-
Front HO2S (RH) terminal D (harness-side) and power supply
-
Rear HO2S (RH) terminal C (harness-side) and body ground
-
Rear HO2S (RH) terminal D (harness-side) and body ground
-
Rear HO2S (RH) terminal D (harness-side) and power supply
-
Front HO2S (LH) terminal C (harness-side) and body ground
-
Front HO2S (LH) terminal A (harness-side) and body ground
-
Front HO2S (LH) terminal A (harness-side) and power supply
-
Rear HO2S (LH) terminal A (harness-side) and body ground
-
Rear HO2S (LH) terminal B (harness-side) and body ground
-
Rear HO2S (LH) terminal B (harness-side) and power supply
-
Middle HO2S terminal A (harness-side) and body ground
-
Middle HO2S terminal B (harness-side) and body ground
-
Middle HO2S terminal B (harness-side) and power supply
-
Rear HO2S terminal A (harness-side) and body ground
-
Rear HO2S terminal B (harness-side) and body ground
-
Rear HO2S terminal B (harness-side) and power supply