mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Entertainment System - No Rear Seat Sound|Page 4061 > < Entertainment System - No Rear Seat Sound|Page 4059
Page 8
background image

3.

Modify the clamshell housing as shown above.

4.

Make sure the FM/MOD cable connector is firmly connected to the FM modulator, then place the modulator back to the clamshell housing.

5.

Give one turn to the FM/MOD cable as shown and secure the FM/MOD cable using a large tie-wrap as shown.

6.

Re-install the clamshell housing cover and put the housing back to the bottom of the console box.

7.

Re-install the console box.

TV Tuner

1.

Remove the left rear scuff plate and rear side trim according to Workshop Manual (section 09-17 REAR SIDE TRIM
REMOVAL/INSTALLATION), then put the trim aside as shown.

2.

Make sure cable connectors are firmly connected to the TV tuner.

Entertainment System - No Rear Seat Sound|Page 4061 > < Entertainment System - No Rear Seat Sound|Page 4059