MPV ES V6-2.5L DOHC (2001)
1.
Squeeze the hooks of the grommet and remove the actuator cable from its bracket. Unhook the cable from the actuator.
2.
Remove the end fitting of the actuator cable from the arm of the throttle.
3.
Squeeze the hooks of the grommet, and remove it from the cable bracket.
4.
Remove the actuator cable clip from the body.
5.
Remove the actuator cable and discard.
ACTUATOR CABLE INSTALLATION
1.
Press the grommet into the cable bracket ensuring the grommet is secure/tight in the bracket.