MPV ES V6-2.5L DOHC (2001)
Intake Manifold Runner Control (IMRC) Actuator removal/Installation
1. Remove the IMRC actuator cable (1).
2. Remove the IMRC actuator body (2).
3. Install in the reverse order of removal.
IMRC Cable Removal Note
Caution: Do not remove the IMRC cable bracket from the IMRC housing. Removing the IMRC bracket may cause poor engine running condition
because the IMRC shutter valve angle will change.
IMRC Cable Installation Note
Install the IMRC cable through the bottom of the fuel pipes.
Fuel Distributor Removal Note
Disconnect the fuel injector connector and fuel hoses using the SST before removing the fuel distributor.