MPV ES V6-2.5L DOHC (2001)
2. Install the remaining bolts and studs, and then tighten all bolts and studs in the order shown.
Front Oil Seal Installation Note
1. Assemble the front oil seal using part A of the SST (49 UN30 3335) and the SST (49 UN01 002).
2. Apply clean engine oil to the oil seal.
3. Push the oil seal slightly in by hand.
4. Compress the oil seal using the SSTs.
Crankshaft Pulley Installation Note
1. Seal the keyway in the crankshaft pulley using silicone sealant.
2. Install the crankshaft pulley using the SST and the crankshaft pulley lock bolt washer.
Crankshaft Pulley Lock Bolt Installation Note