MPV ES V6-2.5L DOHC (2001)
This stops the accumulation of condensation on the evaporator/cooling unit, and it helps dry the inside of the cooling unit.
Customers having this concern should have their vehicle repaired using the procedure shown above.
Disclaimer
Information
REPAIR PROCEDURE
1. Verify customer concern.
2. Verify the evaporator drain has no blockage.
3. Apply "Mazda Air Cooling Coil Coating" according to the attached instructions. Refer to the table below for the applicable repair instructions.
NOTE:
^ Follow the instructions in the procedures completely to ensure an effective repair. If insufficient care is taken on the drying sequence of product, the
coating will not last, and the concern will reoccur.
^ If the odor is still present after treatment, it may be necessary to remove and clean the evaporator, the evaporator foam, and the inside of the cooling
unit housing with a mild dish soap and water solution. To avoid damage to components, do not clean with bleach. See Workshop Manual section 07
for removal instructions.
WARNING:
^ When using this product, avoid skin and eye contact. Wear safety glasses and gloves, and avoid breathing vapors.
^ Read all the safety and first aid instructions on the back of the Mazda bottle.
4. Verify repair.