MPV ES V6-2.5L DOHC (2001)
Tail Lamp: Service and Repair
REAR COMBINATION LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear side trim. (Right side only)
3. Remove in the order indicated below.
1. Connector
2. Screw
3. Rear combination light
4. Socket
5. Brake light/taillight bulb
6. Rear turn light bulb
7. Back-up light bulb
4. Install in the reverse order of removal.
Socket Installation Note
1. Hook the harness as shown in the figure.