MPV ES V6-2.5L DOHC (2001)
Minimum commutator diameter
28.6 mm {1.13 in}
5. Measure the segment groove depth of commutator.
-
If not within the minimum specification, undercut the grooves to the standard depth.
Standard depth
0.4 - 0.6 mm {0.016 - 0.023 in}
Minimum depth
0.02 mm {0.08 in}
Magnetic switch
1. Inspect for continuity between terminals S and M using an ohmmeter.
-
If there is no continuity, replace the magnetic switch.
2. Inspect for continuity between terminal S and the body using an ohmmeter.
-
If there is no continuity, replace the magnetic switch.