MPV ES V6-2.5L DOHC (2001)
2. Remove the tie rod using the SST.
Locknut (Adjusting Cover) Disassembly Note
1. Remove the locknut using the SST.
Adjusting Cover Disassembly Note
1. Remove the adjusting cover using the SST.
Locknut (Housing Cover) Disassembly Note
1. Temporarily install the inner ball joint to prevent damage to the oil seal.
Pinion Shaft Component Disassembly Note
1. Remove the pinion shaft component by tapping lightly on the head of the pinion shaft using a plastic hammer.
Upper Bearing, Oil Seal Disassembly Note