MPV ES V6-2.5L DOHC (2001)
Oil Seal and O-ring Assembly Note
1. Press the oil seal until it is flush with the edge of the rack bushing as shown.
2. Install the 0-ring into the rack bushing.
Rack Bushing Assembly Note
1. After attaching the SST to the end of the steering rack, install the rack bushing to the rack housing.
Rack Stopper Assembly Note
1. Using snap ring pliers, screw the rack stopper into the rack housing until the hole on the rack stopper lines up with the oblong hole on the rack
housing.
2. Insert the clip into the hole on the rack stopper.
3. Install the rack stopper by turning the rack stopper clockwise.