MPV ES V6-2.5L DOHC (2001)
Bearing Assembly Note
1. Install the new bearing using the SST.
Caution:
-
Press the outer race of the bearing.
Dust Seal (Left) Assembly Note
1. Apply grease to the new dust seal lip.
2. Install the new left side dust seal using a steel plate and the SST.
Caution:
-
Do not damage the rubber part of the dust cover.
Joint Shaft Assembly Note
1. Assemble the joint shaft using a press and the SST.
Caution:
-
Support the inner race of the bearing.
Dust Seal (Right) Assembly Note
1. Apply grease to the new dust seal lip.