MPV ES V6-2.5L DOHC (2001)
1. Adjust clearance A by turning the adjusting bolt of the SST.
Clearance A 2.9 mm (0.11 inch)
2. Crimp the wheel side small boot band using the SST. Verify that clearance B is within the specification.
-
If clearance B is more than the specification, reduce clearance A of the SST and crimp the boot again.
-
If clearance B is less than the specification, replace the boot band, increase clearance A of the SST, and crimp the new boot.
Clearance B 2.4 - 2.8 mm (0.095 - 0.1 10 inch)
3. Verify that the boot band does not protrude from the boot band installation area.
-
If it does, replace the boot band and repeat steps 2 and 3.
4. Fill the boot with the repair kit grease.
5. Adjust clearance A by turning the adjusting bolt of the SST.
Clearance A 3.2 mm (0.13 inch)
6. Crimp the wheel side big boot band using the SST.
7. Verify that clearance B is within the specification.
-
If clearance B is more than the specification, reduce clearance A of the SST and crimp the boot again.
-
If clearance B is less than the specification, replace the boot band, increase clearance A of the SST and crimp the new boot.
Clearance B 2.4 - 2.8 mm (0.095 - 0.110 inch)
8. Verify that the boot band does not protrude from the boot band installation area.
-
If it does, replace the boot band and repeat steps 7 and 8.