MPV ES 4WD V6-3.0L SOHC (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Replacement
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal indicated in the table. Tighten the following:
^
Banjo Bolt 24-35 Nm (18-26 ft. lbs.).
^
Brake Pipe Fittings 12.8-21.5 Nm (113-190 inch lbs.).
^
Electrical Assembly
-
Mounting Bolts 2.3-2.9 Nm (17-20 inch lbs.).
-
Center Mounting Bolt 17-19 Nm (13-14 ft. lbs.).
^
Mounting Bolts 19-25 Nm (14-18 ft. lbs.).
^
Ground Wire Bolt 19-25 Nm (14-18 ft. lbs.).