MPV ES 4WD V6-3.0L SOHC (1997)
2. Measure the starting torque of the spider by using the pull gauge. Starting torque should be within 0.3 - 0.7 Nm (3 - 6 inch lbs.).
3. Install different snap rings to adjust the starting torque if necessary.
2. Measure the starting torque of the spider by using the pull gauge. Starting torque should be within 0.3 - 0.7 Nm (3 - 6 inch lbs.).
3. Install different snap rings to adjust the starting torque if necessary.