MPV ES 4WD V6-3.0L SOHC (1997)
Wiper Switch: Testing and Inspection
Rear Wiper and Washer Switch Inspection
1. Remove the side panel.
2. Remove the lower panel.
3. Remove the glove compartment.
4. Remove the glove compartment cover.
5. Remove the center lower panel.
6. Remove the center upper panel.
7. Remove the rear wiper and washer switch.
8. Check for continuity between the rear wiper and washer switch terminals by using an ohmmeter.
9. If not as specified, replace the rear wiper and washer switch.