mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Dropping Resistor, A/T|Testing and Inspection|Page 1854 > < Control Module, A/T|Testing and Inspection|Page 1850

MPV ES 2WD V6-3.0L SOHC (1998)

Page 1
background image

Dropping Resistor: Testing and Inspection

DROPPING RESISTOR INSPECTION 

1. Disconnect the dropping resistor connector. 

2. Measure the resistance of the terminals.
3. If not correct, replace the dropping resistor. 
4. Connect the dropping resistor connector.

Dropping Resistor, A/T|Testing and Inspection|Page 1854 > < Control Module, A/T|Testing and Inspection|Page 1850