MPV ES 2WD V6-3.0L SOHC (1998)
1. Before installing a new rear dust seal into the bearing support component, apply lithium-based grease to the shaded area.
2. Install the rear dust seal into the support component from the rear side by using the SSTs as shown in the figure.
Front Dust Seal Assembly Note
1. Before installing a new front dust seal into the bearing support component, apply lithium-based grease to the shaded area.
2. Install the front dust seal into the support component from the front side by using the SSTs as shown in the figure.
Center Bearing Support Component Assembly Note