mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine - Coolant Temperature Sensor/Switch > < Component Inspection|Page 1320
Page 1
background image

Radiator Cooling Fan Motor Relay: Testing and Inspection

COOLING FAN RELAY INSPECTION

1. Disconnect the negative battery cable.

2. Remove the cooling fan relays from the relay box.
3. Inspect for continuity between the cooling fan relay terminals using an ohmmeter.

^

If not as specified, replace the cooling fan relay.

Cooling fan relay No.1

Cooling fan relay No.2 - No.7

Engine - Coolant Temperature Sensor/Switch > < Component Inspection|Page 1320