mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 953
Page 2
background image

Compression pressure limit chart 

Note:  Use the Compression Pressure Limit Chart when comparing cylinder compression readings to determine if the lowest reading is within 75
percent
 of the highest reading.

Example: After measuring the compression pressure of all cylinders, if maximum reading is 1351 kPa (13.77 kgf/cm2, 196 psi) and minimum reading
is 1069 kPa (10.89 kgf/cm2, 155 psi), engine condition is within the specification and compression is normal.

11. Remove the compression gauge.
12. Connect the ignition coil connector.
13. Install the fuel pump relay.
14. Install the spark plugs.

Tightening torque: 15 - 22 Nm (1.5 - 2.3 kgf-m, 11 - 16 ft. lbs.) 

15. Install the high-tension lead.

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 953