mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Hose/Line HVAC|Service and Repair|Page 794 > < Cooling System - Coolant Leak From Rear Heater Pipe|Page 790
Page 1
background image

Hose/Line HVAC: Service and Repair

1. Disconnect the negative battery cable.
2. Evacuate the refrigerant from the system.

3. Remove the following parts, depending on pipe and hose to be removed.

CAUTION:
-

If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always
immediately plug all open fittings after removing any refrigeration cycle parts to keep moisture or foreign material out of the cycle.

-

Do not allow A/C compressor oil to spill. Operating the A/C compressor without sufficient A/C compressor oil can lead to abnormal noise and
cause the A/C compressor to seize.

Front

Hose/Line HVAC|Service and Repair|Page 794 > < Cooling System - Coolant Leak From Rear Heater Pipe|Page 790