MPV LX V6-2.5L DOHC (2000)
Fuel Injector: Service and Repair
Fuel Injector Removal/Installation
CAUTION: Disconnecting/connecting the quick release connector without cleaning it may possibly cause damage to the fuel pipe and quick release
connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free
of foreign material.
1. Complete the "BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Remove the intake manifold.
4. Disconnect the fuel injector connectors and remove the harness from the fuel distributor.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Complete the "AFTER REPAIR PROCEDURE".
Plastic Fuel Hose Removal Note
1. Remove the clip from the quick release connector.
2. Set the SST (49 UN01 051) for 3/8 inch hose/the SST (49 UN01 052) for 1/2 inch hose onto the quick release connector.