MPV LX 4WD V6-3.0L SOHC (1997)
Arm Rest: Service and Repair
Front Door Trim Removal / Installation
1. Disconnect the negative battery cable.
2. Remove the switch panel.
3. Remove the front door trim installation caps.
4. Remove the front door trim installation screws.
5. Pull the front door trim forward to disengage clips A from the body.
6. Lift the front door trim upward to disengage pins B from the body.
7. Disconnect the harness connectors, and remove the front door trim.
8. Install in the reverse order of removal.
