mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sensors and Switches > < Wiper Relay|Testing and Inspection|Page 297
Page 1
background image

Wiper Relay: Service and Repair

1. Disconnect the negative battery cable.
2. Remove the passenger's side front scuff plate.
3. Remove the passenger's side front side trim.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Install the passenger's side front side trim.
7. Install the passenger's side front scuff plate.
8. Connect the negative battery cable.

Sensors and Switches > < Wiper Relay|Testing and Inspection|Page 297