MPV LX 4WD V6-3.0L SOHC (1997)
Seals and Gaskets: Service and Repair
On-Vehicle Seal Replacement
Case Adapter Oil Seal
1. Clean the transmission and transfer exterior thoroughly by using a steam cleaner or cleaning solvent.
2. Remove the transfer case.
3. Drain the ATF.
4. Remove the oil seal from the adapter case, being careful not to allow any metal tools to scratch the adapter case or output shaft.
5. Apply ATF to the oil seal lip.
6. Install a new oil seal by using a Special Service Tools (SSTs).
7. Install the transfer case.
8. Add ATF to the specified level.